Simply Sketched Saturday Challenge #17 – Paisleys & Posies

Image ~ 18 February 201722 February 2018 ~ Anna Krol ~ 16 Comments

Anna’ Stampin’ Cave – Simply Sketched Saturday Challenge #17 – Paisleys & Posies

Thank you for joining us for another Simply Sketched Saturday Challenge! We are so excited to be sharing this hop with you. The products used are all available in the current Annual, or seasonal, Stampin’ Up!® Catalogues*. Simply use the buttons at the bottom of the post to keep hopping!

Hello and welcome after a long break. Today’s brilliant sketch has been designed by lovely Sam from Sam’s Sentiments blog. Just check how beautiful this sketch is?! Sadly Sam wasn’t able to take a part in the hop. Such a shame.

I’ve been so busy lately with home renovating and night shifts, that only a couple of days ago I realised our monthly blog hop is today. I panic slightly first but the moment I sit down to the sketch, I knew exactly what I wanted to make. I decided to ‘dig out’ my favourite stamp set from Autumn-Winter catalogue: Paisleys & Posies, as it seemed perfect for the technique I wanted to try: watercolour with markers. Well, it’s kinda watercolour. Anyhow. I had so much fun that I created not one but three cards.

Aren’t these gorgeous?! Such bold designs! And they really super easy to make.

Paisleys & Posies cards dimensions:

3x Basic Black cardstock: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm) + 2 x strips 1″x 4-1/8″ + 1 stripe 3/8″x 5-2/8″
3x White Vellum cardstock: 3-5/8″ x 5-3/8″(9,2 x 13,6 cm)
3x Water Colour Paper: 3-1/2″ x 5-2/8″ (8,9 x 13,3 cm)
3x Very Vanilla cardstock: 3-1/2″ x 5″ for the inside panels + scraps for sentiments
scraps of the following cardstocks for die-cutting: Basic Black, Rich Razzleberry, Melon Mambo, Tempting Turquoise, Old Olive, Pool Party & Pear Pizzazz

To start off, I stamped various images from Paisleys & Posies Stamp Set onto the watercolour panel in Basic Black Archival Ink.

Tip of the day: Because I did my cards late at night, I had no time for the ink to dry completely but I didn’t want to smear black all over my watercolour panels. So I sprinkled clear embossing powder over the whole piece once I was done with stamping. But I didn’t heat set it, I just let embossing powder to ‘soak in’ all the ‘moisture’. I let it sit for couple of minutes and then brush off the powder.

When my panels were ready I started to colour them in with Stampin’ Markers. Nothing fancy really, and no need to stay in lines either.

For the first card, I’ve used Melon Mambo, Tangerine Tango, Daffodil Delight, Old Olive and Tempting Turquoise. When all the images were coloured in, I spritzed the whole panel with water. And that’s when all the ‘magic’ happen, as all the colours blend together nicely creating a beautiful watercolour piece. It’s like making your own watercolour DSP. And each piece is different.

To add more colour I dried my panel with a heat tool. Next, I colour it in again with markers and spritz it with water. You can build up the colour as much as you wish, just remember to dry your panel in-between.

For my next card, I decided to use all markers from Brights family. But this time I only spritz it once, hence much more subtle look.

For the last cardI’ve used Subtles Stampin’ Markers and I have to say they needed the most work. I had to dry my piece and keep adding more colour several times until I was happy with the outcome. Once all my panels were created I decided to add some shimmer to them. I added few drops of Clear Wink of Stella to the water in my spritzer, and I spritzed all the panels.

Once the panels were dry I die-cut three circles from each panel: full circle using 1-7/8” circle from Stitched Shapes Framelits Dies and two ‘partial’ circles using Layered Circle Framelits Dies. I also die-cut slightly bigger scalloped circles from Basic Black cardstock to go underneath.

To assemble my cards I adhered vellum to card bases and watercolour panels on top. Next, I glued black scalloped circles underneath the watercolour ones and in-laid them back into the panels. I also adhered Basic Black strips, sliding them slightly underneath the die-cut circles.

I stamped my sentiments (masking a part of it) on a 3/8″ strip of Very Vanilla cardstock, and adhered it to the card with liquid glue. The full sentiment is stamped inside of the card.

For the final touch, I die-cut some leaves and flowers using a couple of intricate dies from Paisleys Framelits Dies and adhered them to the black stripes.

And these are my cards for today. I hope you like my take on the sketch. Now be sure to hop along to see more inspiring projects. Your next stop is very talented Hannah.

Thank you for stopping by and have a blessed day,

Inside The Lines Altered Photo Frame

Image ~ 28 January 201721 February 2018 ~ Anna Krol ~ 25 Comments

Anna’ Stampin’ Cave – Inside The Lines Altered Photo Frame

In my project today I decided to create altered photo frame with beautiful, Inside The Lines Designer Series Paper. With an ever-growing trend in adult colouring books, this paper is just spot on.

I don’t know about you, but I love these bold botanical designs. They coordinate with Dragonfly Dreams Stamp Set & Dies, but you can use them on their own too. Colour them in with markers, inks or watercolour pencils – it’s fun and very therapeutic…or leave them black&white. Whatever tickles your fancy.

The frame is from Ikea and is called Virserum. It measures 7-1/2 x 9-1/2″ (19 x 24 cm) and comes with inside mount, hence I only needed 4″x 6″ (10 x 15 cm) piece of DSP to fit inside.

I’ve chosen this lovely, jungle-like design and cut it into 4″x 6″ rectangle. Because I was aiming for a subtle look I decided to watercolour my piece.

Bear in mind this is not watercolour paper so you can’t add too much water to it.

For the foliage, because it’s such a small area, I’ve used Stampin’ markers: Pear Pizzazz, Wild Wasabi, Old Olive, Garden Green and Always Artichoke. First, I scribbled my markers on a craft mat. I also spritz some water on my craft mat, next to the markers. I did it deliberately, to have more control of how much water I use. Next, I took dry aqua painter, picked up some water with its brush, next picked up some colour from the mat and started colouring my foliage. I was adding more colour and more water to the mat when needed. There are 4-5 layers of colour on leaves, each layer added when the first one was dry.

To colour in the rest of the image, I’ve used ink pads as my palettes.

I’ve used Soft Sky for sky and dragonfly (with a little dab of Island Indigo marker). Mountains are coloured with Smoky Slate.

For the tree trunk, I’ve used Tip Top Taupe ink pad. To add some highlights I’ve used Whisper White Craft Ink (yes, I’ve used it with aqua painter too).

Polypores or conks (I’m not sure how they are called in the UK so forgive me if I’m wrong) are watercoloured with a mix of Sahara Sand, Crushed Curry and again some white craft ink for highlights.

For the final touch, I’ve added White Perfect Accents as dew drops (one on the sky is hiding a little boo-boo). And as a must, I had to add some shimmer with clear of Wink of Stella to the dragonfly, mountain tops, and polypores. Sadly it’s really hard to capture this lovely shimmer on photos. But now to the frame.

Believe it or not, this is my first ever altered photo frame. I knew I want flowers, but for a long time, I couldn’t decide on a colour. First, I wanted to go with quite a feminine look, so pinks and oranges. But once I had all my flowers ready I didn’t really like it. Typical haha. But no worries, I will use them to something else. And then I had this revelation: how about Very Vanilla?! Genius!

I die-cut oodles of flowers and leaves from Very Vanilla and Vellum cardstock. Arranged them around the frame and once I was happy with the placing, I adhered them with glue dots.

But as you may know me already, nothing can be too easy haha And when I looked at my frame something was missing, in my humble opinion. Oh right, it was too ‘clean’, too ‘white’. I needed some ‘controlled mess’.

I pressed Pear Pizzazz and Soft Sky ink pads next to each other on the craft mat and spritz it with water. I covered the glass with a piece of paper, and using a clean brush I added random and less random splatters to the flowers and leaves. And I have to say I love it now! And I hope you like my little project too.

I also want to add this project to the #071 Theme Challenge over at Global Design Project Challenge Blog. This weeks theme is ‘3D Or Off The Page’

As always, if you wish to purchase any of products I have used, simply click the images below to go directly to my online store.

Thank you for stopping by and have a blessed day!

Inside The Lines Designer Series Paper

[143830]

£0.00

Botanical Builder Framelits Dies

[140625]

£30.00

Very Vanilla A4 Card Stock

[106550]

£8.25

White Vellum A4 Card Stock

[106584]

£6.00

Many Marvelous Markers

[131264]

£99.00

Crushed Curry Classic Stampin’ Pad

[131173]

£6.00

Pear Pizzazz Classic Stampin’ Pad

[131180]

£6.00

Tip Top Taupe Classic Stampin’ Pad

[138325]

£6.00

Sahara Sand Classic Stampin’ Pad

[126976]

£6.00

Smoky Slate Classic Stampin’ Pad

[131179]

£6.00

Soft Sky Classic Stampin’ Pad

[131181]

£6.00

Whisper White Craft Stampin’ Pad

[101731]

£7.25

Clear Wink Of Stella Glitter Brush

[141897]

£7.25

Aqua Painters

[103954]

£15.50

White Perfect Accents

[138416]

£4.50

Liquid Multipurpose Glue

[110755]

£3.75

Glue Dots

[103683]

£4.75

Stampin’ Trimmer

[129722]

£27.00

Big Shot

[143263]

£99.00

Dragonfly Dreams Stamp Set & Coordinating Dies

Image ~ 14 January 201721 February 2018 ~ Anna Krol ~ 31 Comments

Anna’ Stampin’ Cave – Dragonfly Dreams Stamp Set & coordinating dies

For today’s project, I have used once again Dragonfly Dreams Stamp Set and Detailed Dragonfly Thinlits Dies. I love this bundle and either together or separate, I just can’t get enough of it. This time though I decided to revisit two of my favourite techniques: watercolour and ink smooching. Bright colours, Cucumber Crush and Island Indigo, seemed perfect combination for a dragonfly card.

Watercolour Dragonfly card dimensions:

Cucumber Crush cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21 x 14.8 cm scored in half at 10.5 cm)
Island Indigo cardstock: 4″x 5-6/8″(10,2 x 14,5 cm)
Whisper White cardstock: 3-7/8″ x 5-5/8″ (9.8 x 14.2 cm) and 2-7/8″ x 1/2″(7.4 x 1.3 cm) for a sentiment
Scraps of Whisper White, Shimmery White and White Vellum cardstock for die-cutting

First thing first I had to prepare my watercolour panel. And to be honest I risked a bit using regular Whisper White cardstock here.

If you are not confident with water colouring and don’t want to risk, please always use watercolour paper with ink smooshing technique.

I pressed Cucumber Crush ink pad on a craft mat, spritz it with water (not too much) and took a piece of acetate to lift some of this puddle of colour. I smooshed it on my panel and dried it with a heat gun. I repeat this process couple of times, every time drying my panel in-between until I was happy with layers of colour. Next, I switched to Island Indigo but I only added one layer of colour. The last touch was to add few splotches of ink to my panel with help of aqua painter.

I die cut two dragonflies, one from Whisper White cardstock and one from vellum (without the head) for 3D effect. To colour in cardstock dragonfly I used a very similar technique as previously. I pressed some more of Island Indigo ink on the craft mat, spritz it with water and dabbed the dragonfly straight in the puddle, dried and repeat until I was happy with the colour.

I wanted to add more depth and ‘life’ to my dragonfly, so I sponged the edges of wings and the body with Island Indigo ink. I also added few speckles with bronze metallic Sharpie marker.

While sponging I’ve noticed that the dragonfly was bit ‘flimsy’ (note to myself: if you plan to dab your intricate die-cuts in the puddles of coloured water, use paper with the higher grammage, like watercolour perhaps(!?) lol. So I die-cut just the body of a dragonfly from Shimmery White cardstock, watercolour it, sponged the edges and adhered on top of the dragonfly with liquid adhesive. Next, I adhered the vellum dragonfly underneath, offsetting slightly.

The sentiment I chose comes from the same Dragonfly Dreams stamp set. I stamped it in Versamark on the strip of Whisper White, heat embossed it using Copper Embossing Powder and trimmed it diagonally. The sentiment alone seemed a bit dull so I took a very narrow strip of Whisper White (around 1/8″), dabbed it in Versamark and heat embossed in copper as well. Next, I trimmed it and adhered it to the sentiment, underneath the top edge, so it peeks out slightly.

To assemble the card I’ve used my favourite Tombow liquid adhesive. I love it because it gives you some wiggle room before it sets. Also, it’s the best for those slightly warped watercolour panels. Next, I’ve added my sentiment in the top right corner using dimensionals. For dragonfly, I’ve used Tombow again. The last touch was to add some extra shimmer to the dragonfly with Clear Wink of Stella Glitter Brush. You can’t go wrong with this stuff right?!

I hope you’ve enjoyed my project and that it will give some extra ideas of how to use this beautiful Dragonfly Dreams Bundle. I would love to hear what you think in comments below. As always, if you wish to purchase any of products I have used, simply click the images below to go directly to my online shop.

Thank you for stopping by and have a blessed day

Dragonfly Dreams Photopolymer Bundle

[144728]

£42.25

Detailed Dragonfly Thinlits Dies

[142749]

£28.00

Dragonfly Dreams Photopolymer Stamp Set

[142924]

£19.00

Cucumber Crush A4 Cardstock

[138342]

£7.25

Island Indigo A4 Card Stock

[124390]

£7.25

Whisper White A4 Card Stock

[106549]

£8.25

White Vellum A4 Card Stock

[106584]

£6.00

Shimmery White A4 Card Stock

[121717]

£7.25

Cucumber Crush Classic Stampin’ Pad

[138324]

£6.00

Island Indigo Classic Stampin’ Pad

[126986]

£6.00

Versamark Pad

[102283]

£7.75

Embossing Buddy

[103083]

£5.50

Copper Stampin’ Emboss Powder

[141636]

£4.50

Aqua Painters

[103954]

£15.50

Clear Wink Of Stella Glitter Brush

[141897]

£7.25

Liquid Multipurpose Glue

[110755]

£3.75

Stampin’ Dimensionals

[104430]

£3.75

Paper Snips Scissors

[103579]

£9.00

Stampin’ Trimmer

[129722]

£27.00

Big Shot

[143263]

£99.00

…And The Greatest Of These Is Love – Embossed Impression Technique

Image ~ 22 November 201621 February 2018 ~ Anna Krol ~ 8 Comments

Hello and welcome!

Today, I’ve got for you card using beautiful Bloomin’ Heart Thinlits Dies. I’ve made various cards using this die in the past, but this time I wanted to try something new: an Embossed Impression Technique. This is very easy, yet effective technique. And great way to stretch your dies too.

I’ve used Stampin’ Up! White Shimmery cardstock for this technique, as I planned to do a bit of water colouring later on. I prepared my Big Shot sandwich: Big Shot on Tab 1 -> Cutting Plate -> Silicon {embossing) mat -> cardstock (I swiped the cardstock with embossing buddy). Next, I tapped Versamark over the cutting edge of the die very gently, and placed the die, cutting edge down, on my cardstock. Remember, once it’s on the paper don’t move it or you will mess up your image. I then carefully placed the second cutting plate over the top and run it through the big shot.

Because I put Versamark Ink on the die, now I had that ink in all the ‘valleys’ of the impression I just made. So I sprinkled Gold Stampin’ Emboss Powder over it and heat embossed it.

I love those tiny gold lines! Next, I made few watercolour washes over my piece, using Mint Macaron ink pad and Pool Party reinker. Once dry, I cut my panel to 3-7/8″x 4-3/8″.

I also die cut five flowers, two large and three small, from Whisper White cardstock (I probably should have used Shimmery White cardstock for them too), and adhered them to my piece with glue dots. I’ve added some soft Mint Macaron watercolour wash to the flowers to add some depth to them

My card base is Very Vanilla. I stamped ‘Love’ in Mint Macaron using Brushwork Alphabet stamp set. I adhered my embossed panel with liquid glue to a piece of Mint Macaron mat (4″x 4-1/2″), and add them both to the card base with dimensionals.

To finish off my card I’ve added some shimmer to the flowers with Clear Wink of Stella Glitter Brush and put a rhinestone in each flower centre.

I hope you like my card, and that you give this technique a try.

As always, if you wish to purchase any of the products I have used, simply click the images below to go directly to my online shop.

Thank you for stopping by and have a blessed day

Brushwork Alphabet Photopolymer Stamp Set

[141772]

£23.00

Bloomin’ Heart Thinlits Dies

[140621]

£22.00

Very Vanilla A4 Card Stock

[106550]

£8.25

Shimmery White A4 Card Stock

[121717]

£7.25

Mint Macaron A4 Cardstock

[138344]

£7.25

Whisper White A4 Card Stock

[106549]

£8.25

Mint Macaron Classic Stampin’ Pad

[138326]

£6.00

Pool Party Classic Stampin’ Ink Refill

[122933]

£3.00

Versamark Pad

[102283]

£7.75

Embossing Buddy

[103083]

£5.50

Clear Wink Of Stella Glitter Brush

[141897]

£7.25

Gold Stampin’ Emboss Powder

[109129]

£4.50

Rhinestone Basic Jewels Embellishments

[119246]

£4.50

Aqua Painters

[103954]

£15.50

Stampin’ Dimensionals

[104430]

£3.75

Liquid Multipurpose Glue

[110755]

£3.75

Silicone Craft Sheet

[127853]

£5.50

Heat Tool – Uk Plug

[129054]

£27.00

Big Shot

[143263]

£99.00

Simply Sketched Saturday Challenge #12 – Watercolour Birthday Blooms

Image ~ 23 July 201621 February 2018 ~ Anna Krol ~ 19 Comments

Anna’ Stampin’ Cave – Watercolour Birthday Blooms

Thank you for joining us for another Simply Sketched Saturday Challenge! We’re so excited to be sharing this hop with you. The products used are all available in the current Annual, or seasonal, Stampin’ Up!® Catalogues*. Simply use the buttons at the bottom of the post to keep hopping!

Today’s sketch was designed by very talented and lovely Louise from Whiteflag Designs, who sadly couldn’t take a part in the challenge today. But we hope she’ll be back with us soon.

For today’s card I’ve used Birthday Blooms stamp set but in a rather unexpected colour scheme. Since I can remember I always loved blue and yellow colour combination. Firstly, these were the colours of my town’s sports club Avia Świdnik. These were also the colours of my favourite radio station RMF FM, back when I was a teenager. And it’s not surprising that, when I first moved out from my mum’s, I repainted all cabinets in my new kitchen yellow and blue. Even a fridge, that’s how much I loved these two together 🙂 But enough of my babbling, here’s the card I’ve made:

I slightly alternated the sketch: I created landscape fold card instead of portrait one. I also decided to mirror the image, so the largest ‘panel’ is on the right side of the focal point. For the base, I’ve used beautiful but sadly underrated Delightful Dijon. I truly love its deep, earthy shade. I added two panels of Whisper White to the base: a square that measures 4″x 4″, and a strip that measures 4″x 1-5/8″. For next panels, I’ve used a square piece of Pool Party card stock and a piece of a striped pattern paper from Designer Series Paper Stack in Delightful Dijon. And these are accordingly 1/8″ smaller than Whisper White pieces.

Now for the watercolour. I stamped the flower on a piece of watercolour paper using Versamark, and heat embossed it in white. Using aqua painter, I added water to the petals first and started adding the colour. For the first layer of colour, I’ve used Pool Party. I started really light and added more colour along the way. Next, to add more definition to the flower, I added some shading with Marina Mist. For the leaves, I’ve used a combination of Pear Pizzazz and Wild Wasabi. And again I started light and built up the colour.

When I was happy with the flower it was time to create the background. I added water to my watercolour piece. I had to be really careful to not let the colours from the flower bleed into the background. I’ve used same technique like with the petals: I started with a light wash of Delightful Dijon and I kept adding more colour along the way until I was happy with the results. Next, I’ve used aqua painter to “flick” few droplets of water to the surface of the panel. I think will never get tired of seeing how ink reacts with water and create interesting organic texture. To jazz it up a little more I used Gorgeous Grunge stamp set to stamp some splashes in Delightful Dijon first, followed by Whisper White Craft Ink. When the panel was completely dry I adhered it to my card base. I kept the sentiment really simple: I stamped Happy Birthday from Teeny Tiny Sentiments in Basic Black on a strip of Whisper White and glued it to the card using liquid glue.

To finish off my card I decided to add Delightful Dijon to the centre of the flower with a blender pen, as I don’t own the markers. And the very last touch was to add Clear Wink Of Stella Glitter Brush Pen to the petals and leaves.

I’m so chuffed how this card turned out: beautiful bold colours and textures. I just love how these blue flowers stand out from their deep yellow background. I really hope you like my project too.

Now, be sure to hop along and see more inspiring projects. Your next stop is Karen’s blog – go and see what she has made for you.

Thank you for stopping by and have a blessed day

Anna' Stampin' Cave

creative life by anna krol – stampin' up! uk independent demonstrator

watercolouring

Simply Sketched Saturday Challenge #17 – Paisleys & Posies

Inside The Lines Altered Photo Frame

Dragonfly Dreams Stamp Set & Coordinating Dies

…And The Greatest Of These Is Love – Embossed Impression Technique

Simply Sketched Saturday Challenge #12 – Watercolour Birthday Blooms