Stampin’ Up! Watercolour Wings – Good Things Come In Threes

Anna’ Stampin’ Cave – Stampin’ Up! Watercolour Wings – Good Things Come In Threes

GDP83

Hello, everyone! I hope you have an amazing Saturday so far. We have such a beautiful weather today down here in Midlands – it doesn’t feel like I live in the UK at all ? And I really hope this weather will stay for a little while. Even just to cheer me up. This past week was one of the toughest in last few months, as the pain is back and it ain’t go anywhere in near future. It laughs at painkillers too. So my days are filled with enormous pain that truly makes my brain freeze and I find it hard to concentrate, let alone create. But I had such a great idea for this week’s challenge over at Global Design Project that I just HAD TO make it happen! Do you have it sometimes? An idea that feels that if you won’t try it you will POP!? hahaha So a couple of nights back, I hid in my cave, despite the pain, and … five hours later I came out not with one but three cards! How that even happen?! As I was creating my initial card, more ideas popped into my head and obviously, I HAD TO TRY them all, haha So just a warning:  this post is long and picture (glitter) heavy ?

So I will start with my first card where it all started: lovely, clean & simple and … pink-ish. Not really something you’ve seen here often. But I actually like it:

Anna' Stampin' Cave - Stampin' Up! Watercolour Wings Stamp Set - Good Things Come In Three CAS Card - GDP #083 - Flirty Flamingo_Whisper White_Dazzling Diamonds Glitter_heat&stick

Flirty Flamingo card dimensions:

  • Whisper White Thick cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
  • Flirty Flamingo cardstock: 3-6/8″ x 4″ (9.6 cm x 10.2 cm)
  • Whisper White cardstock: 3-1/2″ x 3-6/8″ (9 cm x 9.6 cm)
  • Flirty Flamingo Ruched Ribbon: 12″ approx, to tie a bow

This beautiful butterfly from Watercolour Wings Stamp Set is a three step stamping image as you have three stamps to create the look.  I’ve used three different shades of pink: Pink Pirouette for the base, Blushing Bride for the details on the wings and Flirty Flamingo for wings’ edges and the body of the butterfly.

Savvy tip: if you’re just starting your papercraft adventure and don’t have many ink colours (been there, done that) you can use the same ink pad to stamp all the layers. If it’s a light colour ink, you can stamp each layer on top on previous one and it will get slightly darker each time. You can repeat more detailed layers couple of times to get the shade you are happy with. If you have dark colour ink, you can use stamping off technique (also called ghost stamping or second/third generation stamping). You simply stamp off your image couple of times before stamp it on your piece. The rule is: the larger the image like the base here, the lighter the shade.

I also stamped this polka-dot-kind-of image in two opposed corners of my panel. You are probably wondering: OK, but where all that glitter come from? And no, I didn’t use glue for that.

When the image was stamped, I prepared the card with embossing buddy and I stamped the edges of the wings of the butterfly, the body and polka dots once again, but this time using Versamark ink. I sprinkled it with Heat & Stick Powder, heat it till it melts, add Dazzling Diamonds glitter and heat set it again. Heat & Stick Powder once re-heated it melts again, making all that glitter to soak in, so when I send this card out the recipient can enjoy beautiful card and won’t be covered in glitter.

I adhered my panel to a Flirty Flaming mat and next to the card base. Firstly, I wanted to create the banner or a strip of cardstock for a sentiment, but it didn’t look good. So using Stamp-A-Ma-Jig I decided where I want my sentiment to go and stamped it in Flirty Flamingo. Next, to jazz it up a little I stamped it twice more, without re-inking my stamp. It’s called ghost stamping or stampin’ off. A little, dinky bow finish off my card.

Card number 2 (Jazz it up babe ?)

Bermuda Bay & Crumb Cake card dimensions:

  • Crumb Cake cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
  • Bermuda Bay cardstock: 3-6/8″ x 4″ (9.6 cm x 10.2 cm)
  • Crumb Cake cardstock: 3-1/2″ x 3-6/8″ (9 cm x 9.6 cm)
  • Bermuda Bay cardstock strip for a sentiment
  • Bermuda Bay Thick Baker’s Twine two lengths: 16″ and 4″ (approx)

I this card for the butterfly I’ve used Soft Sky for the base, Pool Party for all the details on the wings and Bermuda Bay for the body and edges of its wings. And again I stamped polka dots in the corners. I’ve added gold glitter to my images same way as with my first card, using Heat & Stick Powder.

Using two lengths of Bermuda Bay Thick Baker’s Twine I created simple sailor knot. I added mini glue dot behind the knot and adhered it to the Crumb Cake panel. I secured the twine at the back using Fast Fuse. Next, I mounted my panel to the Bermuda Bay mat using thin (1 mm) foam adhesive tape and adhered them both to the card base.

The sentiment is stamped on a strip of Bermuda Bay cardstock and in Bermuda Bay ink for the subtle, tone on tone effect. I also added a strip of DIY gold glimmer paper behind it. I popped it up with dimensionals but before I adhered it to the card base I stamped few rows of polka dot piece on the card base in Versamark.

Card number 3 (the more the fancier ?)

Elegant Eggplant & Basic Black card dimensions:

  • Basic Black cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
  • White Vellum cardstock: 3″ x 3-6/8″ (7.7 cm x 9.6 cm) + extra for die-cutting
  • Elegant Eggplant Paper From Regals Designer Series Paper Stack: 5-1/2″ x 3-6/8″ (14 cm x 9.6 cm)
  • Basic Black cardstock for butterfly
  • Whisper White cardstock for sentiment
  • Gold Metallic Thread

To be able to stamp the butterfly in various colours on black cardstock I stamped the base of my butterfly in Whisper White Craft Ink first. When it dried I stamped the base again, but this time in Perfect Plum. For the details on the centre of the wings, I’ve used Rich Razzleberry. The edges of the wings and body of the butterfly are stamped with Elegant Eggplant ink – I could totally skip this step as honestly, you can’t see that even in person, not only on photos. I added glitter as before and die-cut my butterfly using a coordinating die from Bold Butterfly Framelits Dies.

I took a piece of Elegant Eggplant DSP and I tore two strips of paper from the top and from the bottom. I didn’t measure it, just eyeball it, briefly about 1″. I also tore in half the strip of White Vellum cardstock. I adhered both strips of torn DSP behind the main piece, but showing the reverse design and so the torn edges were showing. I also

I adhered both strips of torn DSP behind the main piece with reverse design up and both strips of vellum behind it with jagged edges showing for extra dimension. I rolled up the edges of my DSP slightly and adhered the whole panel to the card base.

I die-cut a circle from White Vellum using the largest circle die from Stitched Shapes Framelits Dies. Before I added my butterfly on top I stamped the butterfly antenna in Basic Black on the vellum. I adhered few lengths of Gold Metallic Thread behind the butterfly, glued it to the vellum circle with Fast Fuse and next add it to the card base. The sentiment is stamped in Elegant Eggplant n piece of Whisper White cardstock and adhered to the base with glue dots.

And here are all of the cards together:

I hope you like my cards and that I didn’t bore you with my mouthful-sort-of-directions, haha But this is me: love it or hate it ? Please let me know in comments below which one, which style is your favourite. I would love to hear from you!

As always, I really want to encourage you to visit the Global Design Project challenge blog to see other beautiful projects from all around the world. Just click on their logo below to visit the website.

Thank you for stopping by and have a blessed day,

Global Design Project #082 Sketch Challenge Beautiful Message

Anna’ Stampin’ Cave – Global Design Project #082 Sketch Challenge Beautiful Message

GDP82

Hello, everyone! Today I’m playing again with Global Design Project Sketch Challenge. But before I show you my take on the sketch I want to share with you some exciting news. My cards were among the winners at the last GDP Colour Challenge! Woo hoo! But that’s not all. I have also been chosen to be a Guest Designer in the next colour challenge! How cool and what a privilege?!

Guest_Designer_Winner_Anna

Totally unexpected; I’m still pinching myself 🙂 If you have not seen my winning cards, just click the button above.

But now let’s go back to today’s project.

Today I’ve got for you this beautiful, clean & simple card with an amazing message from the Bible.

Anna' Stampin' Cave_Stampin' Up! Easter Message Stamp Set_Mint Macaron_gold foil_gold heat embossing_clean and simple_Jesus is risen

Beautiful Message card dimensions:

  • Whisper White Thick cardstock: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
  • Mint Macaron cardstock: 5-7/8″ x 4″ (14.8 cm x 10.2 cm)
  • Whisper White cardstock: 4-1/8″ x 2-2/8″ (10.4 cm x 5.7 cm)
  • Gold Foil: 5-7/8″ x 1″ (14.8 cm x 2.5 cm)

I was really eager to put my hands on this beautiful stamp set ‘Easter Message’ the moment I saw it. But I was able to order it only just recently.

Anna' Stampin' Cave_Stampin' Up! Easter Message Stamp Set_Mint Macaron_gold foil_gold heat embossing_Jesus is Risen

To create this beautiful card I first took Mint Macaron panel and randomly stamped palm tree all over it, using Versamark inkpad, and heat embossed it in gold.

To make sure none of the embossing powder sticks to the cardstock where unwanted, I rubbed my embossing buddy across the paper before application.

To slightly ‘dull’ golden embossing I rubbed my piece with a dry cloth. I think it creates unique, dramatic effect.

I adhered Mint Macaron panel to the card base, followed by a piece of gold foil.

Next, I took my piece of regular Whisper White cardstock and I stamped cross image in Mint Macaron on the top of my piece, so I still had a room for a sentiment below the cross.

For the sentiment I chose this beautiful, life-giving verse from a Bible: Matthew 28:6 ‘He is not here; He has risen’. I’m short for words to say how much this little verse mean for me.

Anna' Stampin' Cave_Stampin' Up! Easter Message Stamp Set_Jesus Is Risen_Mint Macaron_gold foil_gold heat embossing_clean and simple

I stamped my sentiment in Versamark and heat embossed using Gold Stampin’ Emboss Powder again. To stamp it and not ruin my panel, I’ve used good ole stamp-a-ma-jig, so it’s straight and exactly where it should be.

I mount my piece onto the card base using dimensionals.

I may not be an expert if it comes to clean & simple cards. I’m not good at using a minimal number of supplies either. But I’m working on it, and I have to say I’m really happy how this card came out. I hope you like it too. Gold and mint make such an amazing colour combination.

As always, I really want to encourage you to visit the Global Design Project challenge blog to see other beautiful projects from all around the world. Just click on their logo below to visit the website

If you wish to purchase any of products I have used, simply click the images below to go directly to my online store and don’t forget to enter the hostess code for the month of April XMAJ4CYX to receive a gift from me.

Thank you for stopping by and have a blessed day,

Don’t forget to check:

Stampin’ Up! Spring Summer & Annual Catalogue 2016 2017 Retiring List

Anna' Stampin' Cave Stampin' Up! Retiring Products 2017

It’s that time of the year again, when Stampin’ Up! is getting ready to retire stamps and accessories from both the Annual and Spring Summer catalogues. As sad as it is to see these products go, there’s still time for you to get them before they’re gone. Retiring products will only be available until 31 May, or while supplies last. So if there’s something from retiring products on your wishlist, don’t wait until last day – once they’re gone, they’re gone. And they are selling fast! Click here for more details ->

Global Design Project #081 Colour Challenge – Watercolour Birthday Blooms

Anna’ Stampin’ Cave – Global Design Project #081 Colour Challenge – Watercolour Birthday Blooms

GDP81

Hello and welcome! Today I decided to play along with Global Design Project and their Colour Challenge. I love that one of the colours can be our own choice.

I had couple of ideas which colour to use, but because I couldn’t decide which one to choose I created two cards instead of one 🙂

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Basic Grey Night Of Navy

Basic Grey/Night of Navy ‘Friend To Friend’ card dimensions:

  • Basic Grey cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21cm x 14.8 cm scored in half at 10.5 cm)
  • Watercolour Paper: 3-6/8″ x 3″  (9.5 cm x 7.6 cm)
  • Regals Designer Series Paper Paper Stack: 3-5/8″ x 3/8″ (9.2 cm x 1 cm) strip of diagonal stripes design paper in Night of Navy
  • Night of Navy Solid Baker’s Twine: approx 33″ (84 cm) + strip of Basic Grey cardstock to secure/hide the twine ends inside the card

For this first card, I decided to use rather classic Night of Navy with Basic Grey colour combination.

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Basic Grey Night Of Navy 2.JPG

I heat embossed beautiful floral image from Birthday Blooms Stamp Set on a piece of Watercolour Paper in Whisper White Embossing Powder. Next, I watercolour the image using my ink pads as palettes.  For the flower, I’ve used Night of Navy ink pad. For the leaves, I’ve used Basic Grey Archival ink pad, which was a little bit tricky but doable. Just had to work really fast once I squished some ink onto my ink pad cover flap. When finished my leaves, I’ve added more water to the ink that left on the cover and I’ve done a quick wash of light grey around the flower.

For the sentiment, I chose sweet ‘friend to friend’ from Teeny Tiny Wishes Stamp Set and stamped it in Basic Grey Archival Ink in the bottom right corner of my watercolour panel.

Tip: If using clear mount or wood mount stamp sets, always use Stamp-A-Ma-Jig to align your sentiment. It’s best tool ever!

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Basic Grey Night Of Navy 3.JPG

To prepare my base I stamped the same floral image all over the card front with Versamark ink. Next, I wrapped Night Of Navy Solid Baker’s Twine around the front of the card and secured it at the back with a piece of cardstock.

I adhered a strip of DSP underneath the watercolour piece and added it to the card base, slightly offsetting my piece. The final touch was to add Clear Wink Of Stella to my floral.

For my next card colour combination, I took an idea from Stampin’ Up!’s Annual Catalogue, page 76.  I love how Night of Navy and Delightful Dijon complement each other creating distinguished look.

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Delightful Dijon Night Of Navy

Delightful Dijon/Night of Navy ‘Friend To Friend’ card dimensions:

  • Delightful Dijon cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21cm x 14.8 cm scored in half at 10.5 cm)
  • Regals Designer Series Paper Paper Stack, Night of Navy diagonal stripes design: 4-2/8″ x 3-5/8″ (10.8 cm x 9.2 cm)
  • Watercolour Paper: 3-6/8″ x 3″  (9.5 cm x 7.6 cm)
  • Night of Navy Solid Baker’s Twine: approx 12″ (30 cm)

Same as with my first card, I stamped the whole card front with a floral image from Birthday Blooms Stamp Set in Versamark Ink and adhered the piece of DSP in the middle of my card base.

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Delightful Dijon Night Of Navy 2

Next, I stamped and heat embossed the same image on the watercolour panel in Whisper White. Flowers, as before, are watercoloured with Night of Navy ink, just this time I decided for darker, deeper shade. For the leaves, however, I’ve used Delightful Dijon ink, with a very light wash of DD in the background.

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Delightful Dijon Night Of Navy 3

A sentiment, same again, is stamped in Night of Navy ink in the top right corner of the panel. I took a piece Night of Navy Solid Baker’s Twine, wrapped it at the bottom of my watercolour piece and tied a little bow. I adhered my panel to the card base, offsetting again. Clear Wink of Stella finishes off the look.

And here are both of my cards together:

Anna' Stampin' Cave_Stampin' Up! Birthday Blooms Stamp Set_Watercolour Card_Delightful Dijon with Night Of Navy_Basic Grey with Night Of Navy

I love how they turned out! Same stamp set, same technique, and same design but two completely different looks. Which one do you like the most? Please let me know in comments below.

As always, I really want to encourage you to visit the Global Design Project challenge blog to see other beautiful projects from all around the world. Just click on their logo below to visit the website

Thank you for stopping by and have a blessed day,

 

Negative Die-Cutting

Anna’ Stampin’ Cave – Negative Die-Cutting

 

Hello everyone and welcome! Today I’ve got for you super cool & easy technique to try out: negative die-cutting. Just a reminder: each week we are using Ronald McDonald House stamp set ‘My Hero’.

anna-stampin-cave-my-hero-stamp-set-with-negative-die-cutting

For today’s project, I’ve decided to use this lovely umbrella image. To create my card I started with a Very Vanilla card base and a Very Vanilla panel, slightly smaller than my base. First, I arranged the layout of my card using the Umbrella Weather Framelits. When I was happy with the placing, I die cut the umbrella first and the handle next, from my panel. But instead of using the die-cut piece on the card (as we usually do, don’t we?), I’ve used the negative image. Savvy tip: Don’t throw your die cuts away. You can use them for your next project.

I took my panel, placed it on the card base without adhering it, and I stamped the umbrella and the handle through a die cut holes. Stamp-A-Ma-Jig ( I love this tool!!!) was a big help to position my stamps perfectly. To create an ombre effect on umbrella image, I coloured the stamp with Crushed Curry and Tangerine Tango Stampin’ Markers (Crushed Curry to the top and Tangerine Tango in the middle). And, because I don’t own the 2015-2017 In Colour Stampin’ Markers, I carefully dabbed Watermelon Wonder ink pad to the bottom of the stamp.

my-hero-stamp-set-with-negative-die-cutting-2

When I was done with the stamping, I trimmed my layer at slightly ‘wonky’ angles, and run it through the Big Shot with a Seaside embossing folder. This folder is intended to imitate the waves, but if you turn it aside, it looks like rain streaks on a window, which is totally cool 🙂

I took a piece of Watermelon Wonder DSP from 2015-2017 In Color Designer Paper Stack (there are four different designs to choose from, but I’ve gone for dots). It was slightly bigger than my top layer, but I  didn’t want to use it all on my card. I only wanted it to peek from underneath my top layer where the ‘wonky’ angles were. So I measured it up, trimmed the piece and adhered it to the base. next, using dimensionals, I’ve added the top layer.

my-hero-stamp-set-with-negative-die-cutting

I decided not to use any additional sentiment on my card, as I think the one on the umbrella says it all. To embellish the card I’ve used White Perfect Accents. But hey, you say, these are clear, right? But did you know that you can peel off the white, sticky backing from your  White Perfect Accents, and you get these super awesome clear, perfectly round embellishments?! It’s cool or what?! But, of course, once you peel the backing off, you need to use glue to adhere them.

pootlers-design-team-week-2

So, did you liked my project?! I hope I inspired you to give this technique a go. It’s really cool and you will be hooked in no time!

Thank you for stopping by and have a blessed day,