Join Stampin Up

Pootlers Spring / Summer Celebration Blog Hop

~ Anna Krol ~ 13 Comments

pootler's blog hop

Thank you for joining us on another Pootlers Blog Hop! We’re showcasing lots of gorgeous projects using products from the new Stampin’ Up!® Spring/Summer Catalogue. Simply use the buttons at the end of each post to keep hopping!

If you have arrived here from Jerim Dickins, a big welcome to you. To continue your journey simply use the buttons at the end of each post to keep hopping!

I hope you had a chance to look through our Spring/Summer catalogue and you’ve got your favourites already. I have chosen to use Rose Wonder Bundle from page 18.

Rose Wonder Bundle Watercolour

I know I said that many times but I will say it again: I love everything about this bundle. I’ve played with this stamp set many times, but in today’s project, I incorporated watercolour with inlaid die-cutting. And yes, I’ve used these two techniques with this bundle already in this project.

This time I stamped my image straight onto watercolour paper with Versamark and heat embossed it in white. I’ve added water to the rose petals first and used Calypso Coral and Blushing Bride as my watercolours.

Rose Wonder Bundle Watercolour 4

I let the flower dry completely before I moved to the leaves. And again I added water first. For the leaves, I choose Pear Pizzazz, Wild Wasabi and just a hint of Old Olive.

Rose Wonder Bundle Watercolour 3.jpg

When my rose and leaves were dry I added water to the background. I didn’t want it to be as intense as last time so I mixed Lost Lagoon with Mint Macaron. I love how these two colours complement each other.

When my background was dry I gave it a little spray with water, and “lifted” those water droplets with a paper towel. As you can see it lifted some colour from background too – beautiful effect.

When my card was dry I’ve used Rose Garden Thinlits Dies to die-cut rose straight from my watercolour piece.

Rose Wonder Watercolour 4.jpg

I separated the “frame” and put all these “inside” tiny pieces aside. I dabbed the frame in Versamark, added Heat & Stick powder and heat embossed it for a second. Enough to melt the powder. When it was nice and sticky I cover it with Gold Stampin’ Glitter and heat set it again.

My base is Whisper White. I trimmed the watercolour piece to be slightly smaller than the base. I added Gold Glitter to the bottom of my WW base so this gold will peek a little from underneath the panel.

Now I could assemble the card. I added background panel first, then the frame and all the little die-cuts at the end. I have to say it was really time-consuming but well worth the effect.

Rose Wonder Watercolour bundle 5

For the sentiment, I choose “What a  beautiful blessing you are to me” but decided to use only part of the sentiment. I heat embossed it in gold on a strip of Whisper White and finish it with a piece of a doily.

I truly hope you enjoyed coming to my blog and see my card. Now, be sure to hop along and see more inspiring projects. Below is the list of all the participants but you can also use the buttons to keep hopping. Your next stop is lovely Kathleen Rintoul-Waite – go and see what she has made using the new products.

Thank you for stopping by and have a blessed day!

next pootler blog

previous pootler blog

Full blog line up:

 Sam Hammond

Mandy Barton

Sandra Ronald

Camille Moriaty

Heidi Smith

Hannah McCurley

Louise Thomas

Karen Taylor

Jerim Dickins

Anna Krol –> you are here

Kathleen Rintoul-Waite

Angelina Clark

Ink Smooshing With Bloomin’ Hearts Thinlits Dies – Using Die-cut Negatives

~ Anna Krol ~ 4 Comments

Hello guys! I’m back today with ink smooshing technique again. But this time I’ve used die-cut negatives I’ve saved from my previous project.

bloomin love

For these cards, I decided to choose different colours: shades of red, green and purple. The base of my cards is again a watercolour paper as it’s perfect for watercolour techniques. I explained ink smooshing technique in my post here.

To add some more detail to the die-cut pieces I run them through my big shot with Happy Heart Embossing Folder. I love how they stand out from busy backgrounds.

bloomin love green

To stamp main sentiments I have used my die-cut as a guide to make sure I stamp it exactly in the middle of my card. I stamped it in Versamark and heat embossed in gold. Before adhering the panels I’ve made few “splotches” using Gold Wink Of Stella Glitter Brush.

To finish off my cards I took a strip of black cardstock and heat embossed “love you” sentiment in gold. My husband’s friend came over at the weekend and “nicked” one card for his girlfriend straight away haha Hope she will like it.

If you like my project or got any questions please let me know in the comments below.

Thank you for stopping by. Have a blessed day,

Ink Smooshing With Bloomin’ Hearts Thinlits Dies

~ Anna Krol ~ Leave a comment

I have to say when I first saw Bloomin’ Hearts Thinlits Dies in new Stampin’ Up! Spring Summer Catalogue I couldn’t wait to put my hands on them and try ink smooshing technique.

bloomin love 2

Aren’t these awesome?! And ink smooshing is childishly easy. All you need is a piece of acetate or craft mat, you can use a plastic packaging too (any sleek surface works really).

bloomin love yellow 2

Then you choose the colours you want to use on your card and you simply smoosh them onto your surface. Spritz it with water and dip your card into the ink droplets. Let your card dry completely before you add more colour.

bloomin love yellow

For my cards, I decided for really bright, intense colours. But you can make it as soft as you wish just add less ink and more water. And I have to say here I highly recommend using watercolour paper with this technique.

bloomin love orange 2

I’ve used the same design for all my cards. I die-cut hearts from a piece of Whisper White cardstock using Precision Base Plate. Trust me you need this plate! It’s perfect for more detailed thinlits dies to give you extra fine cuts. I saved the negatives (not tiny bits just “frames”) for another project.

bloomin love orange

I then dabbed my die-cuts in Versamark and heat-embossed it with Iridescent Ice embossing powder. I love the gentle bling/shimmer it gives.

bloomin love blue 2

I wanted the sentiment to really stand out so I took a strip of Basic Black c/s and stamped my sentiments in Versamark and heat embossed them in white.

bloomin love blue

To finish off my cards I added few white and clear sequins from Metallics Sequin Assortment.

I love how these turned out,  really pleased! I know these are not typical cards you would think off for Valentine’s Day, but I love the unusual.

Thank you for stopping by,

Thank You Card Using Crazy About You Stamp Set & Irresistibly Yours Specialty DSP by Stampin’ Up!

~ Anna Krol ~ Leave a comment

My card today uses Crazy About You stamp set and one of the Sale-A-Bration free items: Irresistibly Yours Specialty Designer Series Paper. I love the fresh look of this card as I really wanted to create card that is fresh and spring-ish, while not compromise on my beloved layers 🙂

thanks you

For the background I created a border with Scallop Edge Border punch and piece of Crisp Cantaloupe card stock. Then I randomly stamped leaves from Crazy About You. I chose Pear Pizzazz for that as it’s such a lush yet soft green.

thanks you 3

Above that border I added a piece of vellum. Vellum is quite tricky to attach as you always can see the adhesive trough. So I added few sequin to hide glue dots 🙂

thanks you 2

My little banner is created using a piece of Irresistibly Yours specialty paper. I spritz it with water and added Crisp Cantaloupe ink. This paper is so much more than just a paper. Glossy designs look great alone but they also resist ink. You can try it with spritzers, brayers, sponges, watercolour techniques and more. You can make it bold or subtle as you wish. This paper is a must-have for your paper stash. Check the video HERE

thanks you 1

Now, for the sentiment I cut “you” using Hello You thinlits and adhere it on the border. I stamped “thanks” just above that “you” and “so much” a little below. For a final touch I also made coordinating envelope. Isn’t it springy, fresh-looking card? I love it!

Hope you like this project and as always thank you for stopping by

Stair Step Card With Festival of Trees

~ Anna Krol ~ Leave a comment

Good evening everyone. It’s Saturday – only week away from us moving a home! Yes, finally 🙂 There was so many things coming out in over a month that I thought it will never happen for us to moving hahaha. But finally everything gets into place. The whole new bathroom suite is waiting to be fixed, floor is bought, new soil pipe is on it’s place and the plumbing work will be finished on Tuesday. Plasterboards are nearly done as well – yay! I will tell you more in a coming week 🙂

Today’s project is not today’s for the true. It’s been waiting to be posted for few days now but always something get me distracted. But because I’ve got free hour or so I thought I will post it tonight 🙂

accordian card 2

 

I don’t have to tell you I love Festival of Trees by Stampin’ Up! Do I?! 😀 I absolutely adore this stamp set, and I will tell you it’s not the last project I will make using it 🙂

This is simple Stair Step Card. For the base you need piece of card stock that measure 9 x 4 1/8 inches (22.8×10.5 cm). Then score it at 1, 2, 3 4/8, 5, 7 inches  (2.5, 5, 8.9 , 12.8 and 17.8 cm) making “hills and valleys” same as on the picture:

accordian card 1

For two first “stairs” I cut two pieces of card stock that measures as follows: smallest 4 x 1″ (10 x 2.5 cm) and medium piece 4 x 1.5″ (10 x 3.8 cm). I glued them to the base 1/16″ higher then each “stair” starts. In imperial it’s around 2 mm higher. For the last stair I’ve cut the piece of cardstock which measure 4 x 3 4/8″. One half of that piece I run through the Big Shot using the biggest Deco Label. Then I took a piece of Lost Lagoon cs slighty wider and run it through the Big Shot again using the same size Deco Label to make a frame for the sentiment.

I’ve stamped  six different trees using Lost Lagoon, Smoky Slate and Pear Pizzazz. I used different tree designs from Festivals of Trees. Also, for the “chain” stamp, I’ve used Versamark pad making so called resistant stamping technique where you stamp the details with Versamark and then stamp solid image on the top. The image stamped as first will resist the ink from second stamping 🙂 Then I’ve cut all the trees with coordinating punch. At the end I used the trimmer ( you can use scissors too) to shorten all of the trees so each one have different lenght now. I’ve attached them to the card with Tombow glue: three on the smallest stair and three on the medium one.

I took the piece of Whisper White (which I’ve run through the Big Shot before) and using stamp-a-ma-jig and Smoky Slate I’ve stamped the sentiment from Bright & Beautiful stamp set.

accordian card 3

Then I’ve glued the frame and a piece of Lost Lagoon Silky Taffeta Ribbon. To add more interest I’ve tied a little bow. Now I could glue it all to the card. It really looked good. But something seemed to be missing. So I took a strip of Whisper White and I’ve stamped “ho-ho-ho” and “merry christmas” from Good Greetings. For this sentiment I’ve used Lost Lagoon. I glued that strip to the first stair just below trees.

accordian card 4

Et voila – the card is done 🙂 I really think this stamp set is awesome. And even though for this card you can use different colours, different designs of trees or even different sentiments, but it’s still pretty awesome card! Don’t you think?! 🙂 If you like it (or not 😉 ) please leave a comment below.

Thank you for stopping by,