Simply Sketched Saturday Challenge #16 – I’m Here For You

Image ~ 17 December 201621 February 2018 ~ Anna Krol ~ 10 Comments

Anna’ Stampin’ Cave – Simply Sketched Saturday Challenge #16 – I’m Here For You

Thank you for joining us for another Simply Sketched Saturday Challenge! We are so excited to be sharing this hop with you. The products used are all available in the current Annual, or seasonal, Stampin’ Up!® Catalogues*. Simply use the buttons at the bottom of the post to keep hopping!

Welcome to our 16th sketch challenge blog hop! Today’s sketch has been designed by Amanda Charlesworth.

For a long time, I couldn’t decide if I wanted to create a 3D project or a card for this sketch. But because I definitely feel more confident as a card maker, I saved myself some stress and decided to make a card.

I altered the sketch a little bit and added my own twist to it. The base of my card is Whisper White Thick A4 cardstock that measures 8-1/4″x 5-7/8″, and folded in half at 4-1/8″. Next, I cut two panels: one from regular Whisper White and one Smoky Slate. Both measured 4″x 5-6/8″. I took the Smoky Slate panel and using a multi-wave die from Swirly Scribbles Thinlits Dies, I die cut one piece of ‘waves’.

Savvy Tip: Save the bottom scrap piece for some masking later on.

I took scribble circle stamp from Swirly Bird Stamp Set and stamp it repeatedly in Smoky Slate over the Smoky Slate panel, overlapping and stamping off until the whole piece was covered.

Now I took Whisper White panel and that Smoky Slate scrap piece I saved earlier to create glimmer bottom layer for my wavy die-cut. I lined up the straight edge of my scrap with a bottom edge of Whisper White and squished Versamark pad over the bottom piece of that Whisper White panel. I didn’t want to cover entire panel, only the part that will be peaking through the ‘wavy’ piece. I sprinkled Heat & Stick Powder over it and heat embossed until melted. Next, I added Dazzling Diamond Glitter over it and heat embossed again to secure glitter in place. But why I used that leftover scrap of Smoky Slate, you may wonder? I’ve used it to make sure the very bottom of my WW panel won’t be covered in glitter, so I had a nice spot for my sentiment.

I adhered Smoky Slate panel and ‘waves’ to the Whisper White panel. To finish off my card, I took a beautiful ‘I’m here for you’ sentiment from Weather Together Stamp Set and stamped it in Basic Black at the bottom left corner of my panel. I also added a couple of rhinestones at bottom right corner for a good measure. I’ve mounted the whole piece to the card base using dimensionals.

I really like how this card turned out. Clean and simple. I hope you like my take on the sketch too.

As always, if you wish to purchase any of the products I have used, simply click the images below to go directly to my online shop.

Now, be sure to hop along and see more inspiring projects. Your next stop is lovely Jillian.

Thank you for stopping by and have a blessed day,

Swirly Bird Photopolymer Bundle

[142353]

£42.25

Swirly Scribbles Thinlits Dies

[141497]

£24.00

Swirly Bird Photopolymer Stamp Set

[141749]

£23.00

Weather Together Photopolymer Stamp Set

[141543]

£19.00

Whisper White A4 Thick Cardstock

[140490]

£6.50

Whisper White A4 Card Stock

[106549]

£8.25

Card Stock A4 Smoky Slate

[131291]

£7.25

Smoky Slate Classic Stampin’ Pad

[131179]

£6.00

Basic Black Archival Stampin’ Pad

[140931]

£6.50

Versamark Pad

[102283]

£7.75

Heat & Stick Powder

[100625]

£4.00

Dazzling Diamonds Stampin’ Glitter

[133751]

£4.50

Rhinestone Basic Jewels Embellishments

[119246]

£4.50

Liquid Multipurpose Glue

[110755]

£3.75

Stampin’ Dimensionals

[104430]

£3.75

Heat Tool – Uk Plug

[129054]

£27.00

Big Shot

[143263]

£99.00

…And The Greatest Of These Is Love – Embossed Impression Technique

Image ~ 22 November 201621 February 2018 ~ Anna Krol ~ 8 Comments

Hello and welcome!

Today, I’ve got for you card using beautiful Bloomin’ Heart Thinlits Dies. I’ve made various cards using this die in the past, but this time I wanted to try something new: an Embossed Impression Technique. This is very easy, yet effective technique. And great way to stretch your dies too.

I’ve used Stampin’ Up! White Shimmery cardstock for this technique, as I planned to do a bit of water colouring later on. I prepared my Big Shot sandwich: Big Shot on Tab 1 -> Cutting Plate -> Silicon {embossing) mat -> cardstock (I swiped the cardstock with embossing buddy). Next, I tapped Versamark over the cutting edge of the die very gently, and placed the die, cutting edge down, on my cardstock. Remember, once it’s on the paper don’t move it or you will mess up your image. I then carefully placed the second cutting plate over the top and run it through the big shot.

Because I put Versamark Ink on the die, now I had that ink in all the ‘valleys’ of the impression I just made. So I sprinkled Gold Stampin’ Emboss Powder over it and heat embossed it.

I love those tiny gold lines! Next, I made few watercolour washes over my piece, using Mint Macaron ink pad and Pool Party reinker. Once dry, I cut my panel to 3-7/8″x 4-3/8″.

I also die cut five flowers, two large and three small, from Whisper White cardstock (I probably should have used Shimmery White cardstock for them too), and adhered them to my piece with glue dots. I’ve added some soft Mint Macaron watercolour wash to the flowers to add some depth to them

My card base is Very Vanilla. I stamped ‘Love’ in Mint Macaron using Brushwork Alphabet stamp set. I adhered my embossed panel with liquid glue to a piece of Mint Macaron mat (4″x 4-1/2″), and add them both to the card base with dimensionals.

To finish off my card I’ve added some shimmer to the flowers with Clear Wink of Stella Glitter Brush and put a rhinestone in each flower centre.

I hope you like my card, and that you give this technique a try.

As always, if you wish to purchase any of the products I have used, simply click the images below to go directly to my online shop.

Thank you for stopping by and have a blessed day

Brushwork Alphabet Photopolymer Stamp Set

[141772]

£23.00

Bloomin’ Heart Thinlits Dies

[140621]

£22.00

Very Vanilla A4 Card Stock

[106550]

£8.25

Shimmery White A4 Card Stock

[121717]

£7.25

Mint Macaron A4 Cardstock

[138344]

£7.25

Whisper White A4 Card Stock

[106549]

£8.25

Mint Macaron Classic Stampin’ Pad

[138326]

£6.00

Pool Party Classic Stampin’ Ink Refill

[122933]

£3.00

Versamark Pad

[102283]

£7.75

Embossing Buddy

[103083]

£5.50

Clear Wink Of Stella Glitter Brush

[141897]

£7.25

Gold Stampin’ Emboss Powder

[109129]

£4.50

Rhinestone Basic Jewels Embellishments

[119246]

£4.50

Aqua Painters

[103954]

£15.50

Stampin’ Dimensionals

[104430]

£3.75

Liquid Multipurpose Glue

[110755]

£3.75

Silicone Craft Sheet

[127853]

£5.50

Heat Tool – Uk Plug

[129054]

£27.00

Big Shot

[143263]

£99.00

Elegant Monochromatic With Pop Of Colour

Image ~ 29 September 201622 February 2018 ~ Anna Krol ~ 2 Comments

Anna’ Stampin’ Cave – Elegant Monochromatic With Pop Of Colour

Wow! It’s hard to believe, but today is last day with My Hero Stamp Set from Stampin’ Up! Yep, 5 weeks have passed!

For my final project, I’ve created this striking yet elegant, almost monochromatic card, in shades of grey but with a pop of colour in form of dainty orange flowers.

For the base of my card I took an A4 sheet of Smoky Slate cardstock, cut it in half at 4-1/8″ and folded in half at 5-7/8″. I run the front of the base through Big Shot with Festive Embossing Folder. The panel is a piece of Basic Grey cardstock that measures 2″ x 5-7/8″. I adhere it to the base with Multipurpose Liquid Adhesive.

Next, I created my floral composition using Botanical Builder Framelits Dies. I die cut a couple of leaves from vellum and six flowers: three tiny flowers and three small 3D flowers from a scrap of Whisper White cardstock.

Savvy Tip: Don’t know what to do with random off cuts that are to small to use on cards or to punch anything out of them? Don’t throw them away! I save all my off cuts and use them up when need to die cut small elements, flowers, etc using framelits dies

To add a little bit of colour to my flowers I sponged the edges of the tiny flowers with Watermelon Wonder. For 3D flowers, I decided for more ‘dramatic’ look I sponged entire flowers using Pumpkin Pie ink pad and a dab of Watermelon Wonder to the centres. I also added a large rhinestone to each centre. You can’t really tell from the photos (blame the awful English weather) but I’ve added a touch of shimmer using Clear Wink Of Stella Glitter Brush to each flower (tiny ones too).

Next, I took a strip of vellum ( 1/2″ x 4-1/8″) and stamped a ‘Celebrate’ from My Hero Stamp Set in Versamark. Of course, I’ve used an Embossing Buddy prior to stamping. I heat embossed the sentiment with Silver Stampin’ Emboss Powder.

Tip: For best results with heat embossing always treat your cardstock, dsp, vellum, etc with embossing buddy. I takes off the statick from the surface of your paper, and makes the powder stick only to the areas you stamped.

Tip 2: If you don’t have an embossing buddy or any other antistatic tool you can use cornflour instead. Just sprinkle a little amount of flour over the surface of your cardstock, spread it with fingers or paint brush, and shake off the excess. Now you can stamp and heat emboss.

I assembled my composition using Glue Dots and liquid adhesive. Two tiny flowers on the vellum banner are hiding adhesive that I’ve used to adhere the banner to the card base.

I really like how this card turned out. I love the monochromatic, cold look of greys with a pop of bright orange. And what do you think about this colour combination? Do you like it? I would love to hear from you in comments below.

Thank you for stopping by and have a blessed day,

Simply Sketched Saturday Challenge #12 – Watercolour Birthday Blooms

Image ~ 23 July 201621 February 2018 ~ Anna Krol ~ 19 Comments

Anna’ Stampin’ Cave – Watercolour Birthday Blooms

Thank you for joining us for another Simply Sketched Saturday Challenge! We’re so excited to be sharing this hop with you. The products used are all available in the current Annual, or seasonal, Stampin’ Up!® Catalogues*. Simply use the buttons at the bottom of the post to keep hopping!

Today’s sketch was designed by very talented and lovely Louise from Whiteflag Designs, who sadly couldn’t take a part in the challenge today. But we hope she’ll be back with us soon.

For today’s card I’ve used Birthday Blooms stamp set but in a rather unexpected colour scheme. Since I can remember I always loved blue and yellow colour combination. Firstly, these were the colours of my town’s sports club Avia Świdnik. These were also the colours of my favourite radio station RMF FM, back when I was a teenager. And it’s not surprising that, when I first moved out from my mum’s, I repainted all cabinets in my new kitchen yellow and blue. Even a fridge, that’s how much I loved these two together 🙂 But enough of my babbling, here’s the card I’ve made:

I slightly alternated the sketch: I created landscape fold card instead of portrait one. I also decided to mirror the image, so the largest ‘panel’ is on the right side of the focal point. For the base, I’ve used beautiful but sadly underrated Delightful Dijon. I truly love its deep, earthy shade. I added two panels of Whisper White to the base: a square that measures 4″x 4″, and a strip that measures 4″x 1-5/8″. For next panels, I’ve used a square piece of Pool Party card stock and a piece of a striped pattern paper from Designer Series Paper Stack in Delightful Dijon. And these are accordingly 1/8″ smaller than Whisper White pieces.

Now for the watercolour. I stamped the flower on a piece of watercolour paper using Versamark, and heat embossed it in white. Using aqua painter, I added water to the petals first and started adding the colour. For the first layer of colour, I’ve used Pool Party. I started really light and added more colour along the way. Next, to add more definition to the flower, I added some shading with Marina Mist. For the leaves, I’ve used a combination of Pear Pizzazz and Wild Wasabi. And again I started light and built up the colour.

When I was happy with the flower it was time to create the background. I added water to my watercolour piece. I had to be really careful to not let the colours from the flower bleed into the background. I’ve used same technique like with the petals: I started with a light wash of Delightful Dijon and I kept adding more colour along the way until I was happy with the results. Next, I’ve used aqua painter to “flick” few droplets of water to the surface of the panel. I think will never get tired of seeing how ink reacts with water and create interesting organic texture. To jazz it up a little more I used Gorgeous Grunge stamp set to stamp some splashes in Delightful Dijon first, followed by Whisper White Craft Ink. When the panel was completely dry I adhered it to my card base. I kept the sentiment really simple: I stamped Happy Birthday from Teeny Tiny Sentiments in Basic Black on a strip of Whisper White and glued it to the card using liquid glue.

To finish off my card I decided to add Delightful Dijon to the centre of the flower with a blender pen, as I don’t own the markers. And the very last touch was to add Clear Wink Of Stella Glitter Brush Pen to the petals and leaves.

I’m so chuffed how this card turned out: beautiful bold colours and textures. I just love how these blue flowers stand out from their deep yellow background. I really hope you like my project too.

Now, be sure to hop along and see more inspiring projects. Your next stop is Karen’s blog – go and see what she has made for you.

Thank you for stopping by and have a blessed day

Timeless Love Wedding Card – Colouring On Vellum Technique

Image ~ 16 July 201621 February 2018 ~ Anna Krol ~ 8 Comments

Anna’ Stampin’ Cave Timeless Love Wedding Card – Colouring On Vellum Technique

Hello! Today I wanted to share with you this beautiful card I created for my card swap teamie last month. Our theme was ‘Wedding Bells’ and I think this card fits perfectly.

I think I forgot how amazing working with vellum is. There are so many techniques you could use it for. And my card shows just one of them: colouring on vellum. It’s a really easy technique that even a newbie could do. And it adds that extra OOMPH to your card too 🙂

First, I stamped this floral arc from Timeless Love Stamp Set onto my vellum panel with Versamark Ink. I’ve stamped it twice to create a wreath. Of course, I’ve used my embossing buddy before stamping (any anti-static product will work). Next, I heat embossed it using white embossing powder. TIP! You probably know that already but just in case: When heat embossing on vellum make sure you pre-heat your heat gun. Just switch it on and let it warm up for 30 seconds or so, before hitting the vellum. I usually heat the back of the vellum, which prevents any unwanted warping.

Now to the fun part: colouring! It’s so easy to add colour to the image heat embossed on vellum. I just chose my favourite markers and colour on the back of the vellum. The colours I’ve used are Pink Pirouette, Marina Mist, Pear Pizzazz, So Saffron, Soft Sky and Wisteria Wonder.

It doesn’t have to be perfect: vellum is semi-transparent so it’s very forgiving, and you can’t really see marker strokes on the other side.

Once the colouring was done I stamped two flower clusters from the same set on some Whisper White cardstock, coloured them in with blender pen and fussy-cut them.

Now to assemble the card. I took my vellum and adhered it onto the Very Vanilla panel using glue dots, I hide them behind flower centres. Next, I adhered it to the Tip Top Taupe base. I’ve used the clusters of flowers I fussy-cut earlier, to secure the vellum on two opposite corners, and I also used simple stapler on the other corners. I love how simple stapler can add character to the card!

For the sentiment, I cut a strip of Tip Top Taupe cardstock, heat embossed ‘Congratulations’ in white and I’ve added it to the middle of my card, between two arcs.

I really hope you like my project, and that I inspired you to try, and have some fun with vellum too. As always, if you wish to purchase any of the products I have used, simply click the images below to go directly to my online shop and don’t forget to enter the hostess code for the month of July GUHXWAR6, to receive a gift from me.

I’m adding my card to:

Thank you for stopping by and have a blessed day,

Anna' Stampin' Cave

creative life by anna krol – stampin' up! uk independent demonstrator

Heat Embossing

Simply Sketched Saturday Challenge #16 – I’m Here For You

Savvy Tip: Save the bottom scrap piece for some masking later on.

…And The Greatest Of These Is Love – Embossed Impression Technique

Elegant Monochromatic With Pop Of Colour

Savvy Tip: Don’t know what to do with random off cuts that are to small to use on cards or to punch anything out of them? Don’t throw them away! I save all my off cuts and use them up when need to die cut small elements, flowers, etc using framelits dies

Tip: For best results with heat embossing always treat your cardstock, dsp, vellum, etc with embossing buddy. I takes off the statick from the surface of your paper, and makes the powder stick only to the areas you stamped.

Tip 2: If you don’t have an embossing buddy or any other antistatic tool you can use cornflour instead. Just sprinkle a little amount of flour over the surface of your cardstock, spread it with fingers or paint brush, and shake off the excess. Now you can stamp and heat emboss.

Simply Sketched Saturday Challenge #12 – Watercolour Birthday Blooms

Timeless Love Wedding Card – Colouring On Vellum Technique

It doesn’t have to be perfect: vellum is semi-transparent so it’s very forgiving, and you can’t really see marker strokes on the other side.