Stampin’ Up! Watercolour Wings – Good Things Come In Threes

Image ~ 22 April 201722 February 2018 ~ Anna Krol ~ 6 Comments

Anna’ Stampin’ Cave – Stampin’ Up! Watercolour Wings – Good Things Come In Threes

Hello, everyone! I hope you have an amazing Saturday so far. We have such a beautiful weather today down here in Midlands – it doesn’t feel like I live in the UK at all ? And I really hope this weather will stay for a little while. Even just to cheer me up. This past week was one of the toughest in last few months, as the pain is back and it ain’t go anywhere in near future. It laughs at painkillers too. So my days are filled with enormous pain that truly makes my brain freeze and I find it hard to concentrate, let alone create. But I had such a great idea for this week’s challenge over at Global Design Project that I just HAD TO make it happen! Do you have it sometimes? An idea that feels that if you won’t try it you will POP!? hahaha So a couple of nights back, I hid in my cave, despite the pain, and … five hours later I came out not with one but three cards! How that even happen?! As I was creating my initial card, more ideas popped into my head and obviously, I HAD TO TRY them all, haha So just a warning: this post is long and picture (glitter) heavy ?

So I will start with my first card where it all started: lovely, clean & simple and … pink-ish. Not really something you’ve seen here often. But I actually like it:

Flirty Flamingo card dimensions:

Whisper White Thick cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
Flirty Flamingo cardstock: 3-6/8″ x 4″ (9.6 cm x 10.2 cm)
Whisper White cardstock: 3-1/2″ x 3-6/8″ (9 cm x 9.6 cm)
Flirty Flamingo Ruched Ribbon: 12″ approx, to tie a bow

This beautiful butterfly from Watercolour Wings Stamp Set is a three step stamping image as you have three stamps to create the look. I’ve used three different shades of pink: Pink Pirouette for the base, Blushing Bride for the details on the wings and Flirty Flamingo for wings’ edges and the body of the butterfly.

Savvy tip: if you’re just starting your papercraft adventure and don’t have many ink colours (been there, done that) you can use the same ink pad to stamp all the layers. If it’s a light colour ink, you can stamp each layer on top on previous one and it will get slightly darker each time. You can repeat more detailed layers couple of times to get the shade you are happy with. If you have dark colour ink, you can use stamping off technique (also called ghost stamping or second/third generation stamping). You simply stamp off your image couple of times before stamp it on your piece. The rule is: the larger the image like the base here, the lighter the shade.

I also stamped this polka-dot-kind-of image in two opposed corners of my panel. You are probably wondering: OK, but where all that glitter come from? And no, I didn’t use glue for that.

When the image was stamped, I prepared the card with embossing buddy and I stamped the edges of the wings of the butterfly, the body and polka dots once again, but this time using Versamark ink. I sprinkled it with Heat & Stick Powder, heat it till it melts, add Dazzling Diamonds glitter and heat set it again. Heat & Stick Powder once re-heated it melts again, making all that glitter to soak in, so when I send this card out the recipient can enjoy beautiful card and won’t be covered in glitter.

I adhered my panel to a Flirty Flaming mat and next to the card base. Firstly, I wanted to create the banner or a strip of cardstock for a sentiment, but it didn’t look good. So using Stamp-A-Ma-Jig I decided where I want my sentiment to go and stamped it in Flirty Flamingo. Next, to jazz it up a little I stamped it twice more, without re-inking my stamp. It’s called ghost stamping or stampin’ off. A little, dinky bow finish off my card.

Card number 2 (Jazz it up babe ?)

Bermuda Bay & Crumb Cake card dimensions:

Crumb Cake cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
Bermuda Bay cardstock: 3-6/8″ x 4″ (9.6 cm x 10.2 cm)
Crumb Cake cardstock: 3-1/2″ x 3-6/8″ (9 cm x 9.6 cm)
Bermuda Bay cardstock strip for a sentiment
Bermuda Bay Thick Baker’s Twine two lengths: 16″ and 4″ (approx)

I this card for the butterfly I’ve used Soft Sky for the base, Pool Party for all the details on the wings and Bermuda Bay for the body and edges of its wings. And again I stamped polka dots in the corners. I’ve added gold glitter to my images same way as with my first card, using Heat & Stick Powder.

Using two lengths of Bermuda Bay Thick Baker’s Twine I created simple sailor knot. I added mini glue dot behind the knot and adhered it to the Crumb Cake panel. I secured the twine at the back using Fast Fuse. Next, I mounted my panel to the Bermuda Bay mat using thin (1 mm) foam adhesive tape and adhered them both to the card base.

The sentiment is stamped on a strip of Bermuda Bay cardstock and in Bermuda Bay ink for the subtle, tone on tone effect. I also added a strip of DIY gold glimmer paper behind it. I popped it up with dimensionals but before I adhered it to the card base I stamped few rows of polka dot piece on the card base in Versamark.

Card number 3 (the more the fancier ?)

Elegant Eggplant & Basic Black card dimensions:

Basic Black cardstock card base: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
White Vellum cardstock: 3″ x 3-6/8″ (7.7 cm x 9.6 cm) + extra for die-cutting
Elegant Eggplant Paper From Regals Designer Series Paper Stack: 5-1/2″ x 3-6/8″ (14 cm x 9.6 cm)
Basic Black cardstock for butterfly
Whisper White cardstock for sentiment
Gold Metallic Thread

To be able to stamp the butterfly in various colours on black cardstock I stamped the base of my butterfly in Whisper White Craft Ink first. When it dried I stamped the base again, but this time in Perfect Plum. For the details on the centre of the wings, I’ve used Rich Razzleberry. The edges of the wings and body of the butterfly are stamped with Elegant Eggplant ink – I could totally skip this step as honestly, you can’t see that even in person, not only on photos. I added glitter as before and die-cut my butterfly using a coordinating die from Bold Butterfly Framelits Dies.

I took a piece of Elegant Eggplant DSP and I tore two strips of paper from the top and from the bottom. I didn’t measure it, just eyeball it, briefly about 1″. I also tore in half the strip of White Vellum cardstock. I adhered both strips of torn DSP behind the main piece, but showing the reverse design and so the torn edges were showing. I also

I adhered both strips of torn DSP behind the main piece with reverse design up and both strips of vellum behind it with jagged edges showing for extra dimension. I rolled up the edges of my DSP slightly and adhered the whole panel to the card base.

I die-cut a circle from White Vellum using the largest circle die from Stitched Shapes Framelits Dies. Before I added my butterfly on top I stamped the butterfly antenna in Basic Black on the vellum. I adhered few lengths of Gold Metallic Thread behind the butterfly, glued it to the vellum circle with Fast Fuse and next add it to the card base. The sentiment is stamped in Elegant Eggplant n piece of Whisper White cardstock and adhered to the base with glue dots.

And here are all of the cards together:

I hope you like my cards and that I didn’t bore you with my mouthful-sort-of-directions, haha But this is me: love it or hate it ? Please let me know in comments below which one, which style is your favourite. I would love to hear from you!

As always, I really want to encourage you to visit the Global Design Project challenge blog to see other beautiful projects from all around the world. Just click on their logo below to visit the website.

Thank you for stopping by and have a blessed day,

Global Design Project #081 Colour Challenge – Watercolour Birthday Blooms

Image ~ 7 April 201722 February 2018 ~ Anna Krol ~ 16 Comments

Anna’ Stampin’ Cave – Global Design Project #081 Colour Challenge – Watercolour Birthday Blooms

Hello and welcome! Today I decided to play along with Global Design Project and their Colour Challenge. I love that one of the colours can be our own choice.

I had couple of ideas which colour to use, but because I couldn’t decide which one to choose I created two cards instead of one 🙂

Basic Grey/Night of Navy ‘Friend To Friend’ card dimensions:

Basic Grey cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21cm x 14.8 cm scored in half at 10.5 cm)
Watercolour Paper: 3-6/8″ x 3″ (9.5 cm x 7.6 cm)
Regals Designer Series Paper Paper Stack: 3-5/8″ x 3/8″ (9.2 cm x 1 cm) strip of diagonal stripes design paper in Night of Navy
Night of Navy Solid Baker’s Twine: approx 33″ (84 cm) + strip of Basic Grey cardstock to secure/hide the twine ends inside the card

For this first card, I decided to use rather classic Night of Navy with Basic Grey colour combination.

I heat embossed beautiful floral image from Birthday Blooms Stamp Set on a piece of Watercolour Paper in Whisper White Embossing Powder. Next, I watercolour the image using my ink pads as palettes. For the flower, I’ve used Night of Navy ink pad. For the leaves, I’ve used Basic Grey Archival ink pad, which was a little bit tricky but doable. Just had to work really fast once I squished some ink onto my ink pad cover flap. When finished my leaves, I’ve added more water to the ink that left on the cover and I’ve done a quick wash of light grey around the flower.

For the sentiment, I chose sweet ‘friend to friend’ from Teeny Tiny Wishes Stamp Set and stamped it in Basic Grey Archival Ink in the bottom right corner of my watercolour panel.

Tip: If using clear mount or wood mount stamp sets, always use Stamp-A-Ma-Jig to align your sentiment. It’s best tool ever!

To prepare my base I stamped the same floral image all over the card front with Versamark ink. Next, I wrapped Night Of Navy Solid Baker’s Twine around the front of the card and secured it at the back with a piece of cardstock.

I adhered a strip of DSP underneath the watercolour piece and added it to the card base, slightly offsetting my piece. The final touch was to add Clear Wink Of Stella to my floral.

For my next card colour combination, I took an idea from Stampin’ Up!’s Annual Catalogue, page 76. I love how Night of Navy and Delightful Dijon complement each other creating distinguished look.

Delightful Dijon/Night of Navy ‘Friend To Friend’ card dimensions:

Delightful Dijon cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21cm x 14.8 cm scored in half at 10.5 cm)
Regals Designer Series Paper Paper Stack, Night of Navy diagonal stripes design: 4-2/8″ x 3-5/8″ (10.8 cm x 9.2 cm)
Watercolour Paper: 3-6/8″ x 3″ (9.5 cm x 7.6 cm)
Night of Navy Solid Baker’s Twine: approx 12″ (30 cm)

Same as with my first card, I stamped the whole card front with a floral image from Birthday Blooms Stamp Set in Versamark Ink and adhered the piece of DSP in the middle of my card base.

Next, I stamped and heat embossed the same image on the watercolour panel in Whisper White. Flowers, as before, are watercoloured with Night of Navy ink, just this time I decided for darker, deeper shade. For the leaves, however, I’ve used Delightful Dijon ink, with a very light wash of DD in the background.

A sentiment, same again, is stamped in Night of Navy ink in the top right corner of the panel. I took a piece Night of Navy Solid Baker’s Twine, wrapped it at the bottom of my watercolour piece and tied a little bow. I adhered my panel to the card base, offsetting again. Clear Wink of Stella finishes off the look.

And here are both of my cards together:

I love how they turned out! Same stamp set, same technique, and same design but two completely different looks. Which one do you like the most? Please let me know in comments below.

As always, I really want to encourage you to visit the Global Design Project challenge blog to see other beautiful projects from all around the world. Just click on their logo below to visit the website

Thank you for stopping by and have a blessed day,

Dragonfly Dreams Stamp Set & Coordinating Dies

Image ~ 14 January 201721 February 2018 ~ Anna Krol ~ 31 Comments

Anna’ Stampin’ Cave – Dragonfly Dreams Stamp Set & coordinating dies

For today’s project, I have used once again Dragonfly Dreams Stamp Set and Detailed Dragonfly Thinlits Dies. I love this bundle and either together or separate, I just can’t get enough of it. This time though I decided to revisit two of my favourite techniques: watercolour and ink smooching. Bright colours, Cucumber Crush and Island Indigo, seemed perfect combination for a dragonfly card.

Watercolour Dragonfly card dimensions:

Cucumber Crush cardstock: 8-1/4″ x 5-7/8″ scored in half at 4-1/8″ (21 x 14.8 cm scored in half at 10.5 cm)
Island Indigo cardstock: 4″x 5-6/8″(10,2 x 14,5 cm)
Whisper White cardstock: 3-7/8″ x 5-5/8″ (9.8 x 14.2 cm) and 2-7/8″ x 1/2″(7.4 x 1.3 cm) for a sentiment
Scraps of Whisper White, Shimmery White and White Vellum cardstock for die-cutting

First thing first I had to prepare my watercolour panel. And to be honest I risked a bit using regular Whisper White cardstock here.

If you are not confident with water colouring and don’t want to risk, please always use watercolour paper with ink smooshing technique.

I pressed Cucumber Crush ink pad on a craft mat, spritz it with water (not too much) and took a piece of acetate to lift some of this puddle of colour. I smooshed it on my panel and dried it with a heat gun. I repeat this process couple of times, every time drying my panel in-between until I was happy with layers of colour. Next, I switched to Island Indigo but I only added one layer of colour. The last touch was to add few splotches of ink to my panel with help of aqua painter.

I die cut two dragonflies, one from Whisper White cardstock and one from vellum (without the head) for 3D effect. To colour in cardstock dragonfly I used a very similar technique as previously. I pressed some more of Island Indigo ink on the craft mat, spritz it with water and dabbed the dragonfly straight in the puddle, dried and repeat until I was happy with the colour.

I wanted to add more depth and ‘life’ to my dragonfly, so I sponged the edges of wings and the body with Island Indigo ink. I also added few speckles with bronze metallic Sharpie marker.

While sponging I’ve noticed that the dragonfly was bit ‘flimsy’ (note to myself: if you plan to dab your intricate die-cuts in the puddles of coloured water, use paper with the higher grammage, like watercolour perhaps(!?) lol. So I die-cut just the body of a dragonfly from Shimmery White cardstock, watercolour it, sponged the edges and adhered on top of the dragonfly with liquid adhesive. Next, I adhered the vellum dragonfly underneath, offsetting slightly.

The sentiment I chose comes from the same Dragonfly Dreams stamp set. I stamped it in Versamark on the strip of Whisper White, heat embossed it using Copper Embossing Powder and trimmed it diagonally. The sentiment alone seemed a bit dull so I took a very narrow strip of Whisper White (around 1/8″), dabbed it in Versamark and heat embossed in copper as well. Next, I trimmed it and adhered it to the sentiment, underneath the top edge, so it peeks out slightly.

To assemble the card I’ve used my favourite Tombow liquid adhesive. I love it because it gives you some wiggle room before it sets. Also, it’s the best for those slightly warped watercolour panels. Next, I’ve added my sentiment in the top right corner using dimensionals. For dragonfly, I’ve used Tombow again. The last touch was to add some extra shimmer to the dragonfly with Clear Wink of Stella Glitter Brush. You can’t go wrong with this stuff right?!

I hope you’ve enjoyed my project and that it will give some extra ideas of how to use this beautiful Dragonfly Dreams Bundle. I would love to hear what you think in comments below. As always, if you wish to purchase any of products I have used, simply click the images below to go directly to my online shop.

Thank you for stopping by and have a blessed day

Dragonfly Dreams Photopolymer Bundle

[144728]

£42.25

Detailed Dragonfly Thinlits Dies

[142749]

£28.00

Dragonfly Dreams Photopolymer Stamp Set

[142924]

£19.00

Cucumber Crush A4 Cardstock

[138342]

£7.25

Island Indigo A4 Card Stock

[124390]

£7.25

Whisper White A4 Card Stock

[106549]

£8.25

White Vellum A4 Card Stock

[106584]

£6.00

Shimmery White A4 Card Stock

[121717]

£7.25

Cucumber Crush Classic Stampin’ Pad

[138324]

£6.00

Island Indigo Classic Stampin’ Pad

[126986]

£6.00

Versamark Pad

[102283]

£7.75

Embossing Buddy

[103083]

£5.50

Copper Stampin’ Emboss Powder

[141636]

£4.50

Aqua Painters

[103954]

£15.50

Clear Wink Of Stella Glitter Brush

[141897]

£7.25

Liquid Multipurpose Glue

[110755]

£3.75

Stampin’ Dimensionals

[104430]

£3.75

Paper Snips Scissors

[103579]

£9.00

Stampin’ Trimmer

[129722]

£27.00

Big Shot

[143263]

£99.00

Dragonfly Dreams Clean & Simple For GDP#069 Colour Challenge

Image ~ 12 January 201721 February 2018 ~ Anna Krol ~ 10 Comments

Anna’ Stampin’ Cave – Dragonfly Dreams Clean & Simple For GDP#069 Colour Challenge

Hello and welcome everyone! Something new from me today as it’s the first time when I bite the bullet and decided to take a part in Colour Challenge over at Global Design Project.

I’ve been following this blog for some time now, just never felt confident enough to join in the fun. But hey! It’s just for fun, right?! And when I saw Delightful Dijon (I really, really love this colour) amongst other colours in this week’s challenge, I just knew: now or never. It’s a great colour combination and as my free choice, I simply used Whisper White.

I didn’t craft much lately due to health issues, but I was eager to use a new stamp set from Stampin’ Up! Spring Summer 2017 Catalogue, called Dragonfly Dreams. It comes with coordinating Detailed Dragonfly Thinlits Dies, as a bundle, and is just beautiful. It seemed perfect for the idea I had in my head.

Just forgive me poor photos. I don’t have any fancy equipment and take my photos in the daylight. But the weather is so miserable since few days down here in Midlands, UK, that it was just impossible to take any decent picture.

‘Nearly Inlay’ Dragonfly Dreams card dimensions:

Delightful Dijon cardstock: 11-6/8″ x 4-1/8″ scored in half at 5-7/8″ (29.7 x 10.5 cm scored in half at 14.8 cm)
Whisper White cardstock: 2 panels 4″x 5-5/8″(10,2 x 14,3 cm)

First, I stamped the card base with the polka dot (kinda) background stamp from Dragonfly Dreams Stamp Set until it was all covered. I’ve used Delightful Dijon ink for a tone on tone effect.

Next, I die-cut the largest detailed dragonfly, using Detailed Dragonfly Thinlits Dies, from one of the Whisper White panels and adhered that panel (without dragonfly) to the card base. Of course, I forgot to stamp my sentiment before adhering the panel to the card front. Typical, right?! LOL But nothing was lost yet. I picked the beautiful ‘You sure know how to make someone happy’ sentiment from Dragonfly Dreams Stamp Set (I love sentiments and the fonts in in this set) and heat embossed it on my card base with silver embossing powder. Seemed easy, but while heat embossing it, the base ‘curled up’ a bit. So I run it through my Big Shot to straighten it up. Bear in mind if you’ve got worn out plates they will leave an impression on your cardstock – ask how do I know.

For the inside panel, I stamped few dragonflies in Delightful Dijon in the corners before adhered it with liquid adhesive.

I wanted for my dragonfly to carry some silver detail too, so I stamped tiny splotches/dots from Gorgeous Grunge Stamp Set all over the die-cut, using Versamark ink, and heat embossed it with silver embossing powder.

My original idea was to inlay the dragonfly die-cut back to the negative on the card base. But I’ve changed my mind along the way as the stamped detail on the card base wouldn’t be really visible through the die cut. So I decided to adhere my dragonfly only on the body length but it didn’t look good either. At the end, I’ve used tiny pieces of dimensionals to pop the dragonfly up.

I’m really pleased how this card turned out and I hope you like it too.

I really want to encourage you to check the Global Design Project challenge blog. They have a new challenge every week with various themes and extremely talented Design Team – they will simply blow your mind with their creativity! Just click on their logo below to visit the website

As always, if you wish to purchase any of the products I have used, simply click the images below to go directly to my online shop.

Thank you for stopping by and have a blessed day

Dragonfly Dreams Photopolymer Bundle

[144728]

£42.25

Detailed Dragonfly Thinlits Dies

[142749]

£28.00

Dragonfly Dreams Photopolymer Stamp Set

[142924]

£19.00

Gorgeous Grunge Clear Stamp Set

[130517]

£18.00

Delightful Dijon A4 Cardstock

[138345]

£7.25

Whisper White A4 Card Stock

[106549]

£8.25

Delightful Dijon Classic Stampin’ Pad

[138327]

£6.00

Embossing Buddy

[103083]

£5.50

Versamark Pad

[102283]

£7.75

Silver Stampin’ Emboss Powder

[109131]

£4.50

Stampin’ Dimensionals

[104430]

£3.75

Liquid Multipurpose Glue

[110755]

£3.75

Stampin’ Trimmer

[129722]

£27.00

Big Shot

[143263]

£99.00

Elegant Monochromatic With Pop Of Colour

Image ~ 29 September 201622 February 2018 ~ Anna Krol ~ 2 Comments

Anna’ Stampin’ Cave – Elegant Monochromatic With Pop Of Colour

Wow! It’s hard to believe, but today is last day with My Hero Stamp Set from Stampin’ Up! Yep, 5 weeks have passed!

For my final project, I’ve created this striking yet elegant, almost monochromatic card, in shades of grey but with a pop of colour in form of dainty orange flowers.

For the base of my card I took an A4 sheet of Smoky Slate cardstock, cut it in half at 4-1/8″ and folded in half at 5-7/8″. I run the front of the base through Big Shot with Festive Embossing Folder. The panel is a piece of Basic Grey cardstock that measures 2″ x 5-7/8″. I adhere it to the base with Multipurpose Liquid Adhesive.

Next, I created my floral composition using Botanical Builder Framelits Dies. I die cut a couple of leaves from vellum and six flowers: three tiny flowers and three small 3D flowers from a scrap of Whisper White cardstock.

Savvy Tip: Don’t know what to do with random off cuts that are to small to use on cards or to punch anything out of them? Don’t throw them away! I save all my off cuts and use them up when need to die cut small elements, flowers, etc using framelits dies

To add a little bit of colour to my flowers I sponged the edges of the tiny flowers with Watermelon Wonder. For 3D flowers, I decided for more ‘dramatic’ look I sponged entire flowers using Pumpkin Pie ink pad and a dab of Watermelon Wonder to the centres. I also added a large rhinestone to each centre. You can’t really tell from the photos (blame the awful English weather) but I’ve added a touch of shimmer using Clear Wink Of Stella Glitter Brush to each flower (tiny ones too).

Next, I took a strip of vellum ( 1/2″ x 4-1/8″) and stamped a ‘Celebrate’ from My Hero Stamp Set in Versamark. Of course, I’ve used an Embossing Buddy prior to stamping. I heat embossed the sentiment with Silver Stampin’ Emboss Powder.

Tip: For best results with heat embossing always treat your cardstock, dsp, vellum, etc with embossing buddy. I takes off the statick from the surface of your paper, and makes the powder stick only to the areas you stamped.

Tip 2: If you don’t have an embossing buddy or any other antistatic tool you can use cornflour instead. Just sprinkle a little amount of flour over the surface of your cardstock, spread it with fingers or paint brush, and shake off the excess. Now you can stamp and heat emboss.

I assembled my composition using Glue Dots and liquid adhesive. Two tiny flowers on the vellum banner are hiding adhesive that I’ve used to adhere the banner to the card base.

I really like how this card turned out. I love the monochromatic, cold look of greys with a pop of bright orange. And what do you think about this colour combination? Do you like it? I would love to hear from you in comments below.

Thank you for stopping by and have a blessed day,

Anna' Stampin' Cave

creative life by anna krol – stampin' up! uk independent demonstrator

ideas

Stampin’ Up! Watercolour Wings – Good Things Come In Threes

Global Design Project #081 Colour Challenge – Watercolour Birthday Blooms

Tip: If using clear mount or wood mount stamp sets, always use Stamp-A-Ma-Jig to align your sentiment. It’s best tool ever!

Dragonfly Dreams Stamp Set & Coordinating Dies

Dragonfly Dreams Clean & Simple For GDP#069 Colour Challenge

Elegant Monochromatic With Pop Of Colour

Savvy Tip: Don’t know what to do with random off cuts that are to small to use on cards or to punch anything out of them? Don’t throw them away! I save all my off cuts and use them up when need to die cut small elements, flowers, etc using framelits dies

Tip: For best results with heat embossing always treat your cardstock, dsp, vellum, etc with embossing buddy. I takes off the statick from the surface of your paper, and makes the powder stick only to the areas you stamped.

Tip 2: If you don’t have an embossing buddy or any other antistatic tool you can use cornflour instead. Just sprinkle a little amount of flour over the surface of your cardstock, spread it with fingers or paint brush, and shake off the excess. Now you can stamp and heat emboss.